Update this code for use with a 16Gb Raspberry Pi 5?#14
Open
I have been using this excellent code to control a couple of SPI OLED displays on a Pi4 for a long while, and have now upgraded my system to a Raspberry Pi 5 with 16Gb of memory. And the app does not run anymore. I get:- [6n[H[m[31m2025-04-14 22:24:37 ERR RPI_hal: not running on supported rpi HW [mNo spi, stopping I am not a bad programmer and could under take the changes myself, I would need a few pointers as to where to look for info. Having stepped through the code in Lazarus, the result of AnalyzeRevCode is 'rev1.1;0x06;0x17;0x04;e04171;40;4;aarch64;Sony UK;0x00' 0x06 os 16GB, and the 0x04 is the BCM2712 processor. As to what the RPI_bType of 23 ($17) is, I have not worked out just yet. Help or this being updated would be appreciated. Best regards, Alistair.
AI Analysis
This issue appears to be discussing a feature request or bug report related to the repository. Based on the content, it seems to be still under discussion. The issue was opened by AlistairS12 and has received 2 comments.
Add a comment
Comment form would go here