All set up, but RTSP can't connect#365

Reolink B800 set below help <a href="https://imgur.com/J0lTdUe"><img src="https://i.imgur.com/J0lTdUe.png" title="source: imgur.com" /></a> <a href="https://imgur.com/LanO0Vz"><img src="https://i.imgur.com/LanO0Vz.png" title="source: imgur.com" /></a> ```toml # A bind value of 0.0.0.0 means any network this computer can access # You can chage this to a specfic network e.g. "192.168.1.101" here # Or to no networks e.g. this computer only "127.0.0.1" bind = "0.0.0.0" # Default port is 8554 but you can change it by uncommenting the following # bind_port = 8554 # Uncomment the following and supply a path to a valid PEM # to activate TLS encryption. # The PEM should contain the certificate and the private key # If TLS is activated you must connect with "rtsps://" and not "rtsp://" # certificate = "/path/to/pem/with/cert/and/key" # Choose if the client is required to provide a certificate signed by the server's CA. # none|requested|required - default none # tls_client_auth = "required" # You can password protect the rtsp server mount points by adding users # like the following me and someone. If you do not add [[users]] # then anyone can connect without a password or username # To access such a stream try using a url such as "rtsp://me:[email protected]/driveway" # [[users]] # name = "me" # pass = "mepass" # # [[users]] # name = "someone" # pass = "someonepass" [[cameras]] name = "B800" username = "admin" password = "Aa123456" address = "192.168.0.102:9000" # mqtt.broker_addr = "192.168.1.122" # mqtt.port = 1883 # mqtt.credentials = ["mqtt_user", "mqtt_password"] # MQTT Discovery: https://www.home-assistant.io/integrations/mqtt/#mqtt-discovery # mqtt.discovery.topic = "homeassistant" # Uncomment to enable # If using discovery, _ characters are replaced with spaces in the name and title case is applied # mqtt.discovery.features = ["floodlight"] # Uncomment if this camera has a spotlight/floodlight # If you use a battery camera: **Instead** of an `address` supply the uid # as follows # uid = "ABCD01234567890EFG" # By default any of the users can connect (or anyone at all if no users are specfied) # You can uncomment the following to permit only specfic users # permitted_users = [ "me" ] # By default "both" "mainStream" and "subStream" are connected # If your device has user connection limits try a single stream instead. # stream = "mainStream" # By default neolink will use any means to connect to the camera # from a UID # This include relaying via reolink servers # This variable `discovery` controls the method of UID discovery # - Possible values # "relay" # Any means including connecting and transmitting through reolink # "map" # Register our local ip address with reolink and ask the camera to connect to us but don't relay data through reolink # "remote" # Register our local ip address with reolink but only permit same network connections (useful if broadcast is not possible) # "local" # Do not contact reolink servers at all. Rely soley on local UDP broadcast based discovery # # "cellular" # Cellular camera only support Relay and Map to speed up connecting to them this option will skip the local/remote # # discovery = "relay" # Certain types of camera emit status messages (such as battery levels) # # By default we hide these status messages from the user but you can instead requst that # they be printed to stdout using print_format # # Valid values are: # - None # - Human # - Xml # # print_format = "None" # Internally neolink uses a buffer to improve delivery of frames at their actual times # A large buffer can work even for large interupts in the connection with the camera # A small buffer will reduce the latency introduced # buffer_size: 100 # Over long periods of time the camera buffer can exhaust with no means of recovery # to combat this a time stretching stratery is employed where the stream is slowed # as the buffer is exhausted and sped up when full # this can keep the camera and rtsp streams in sync and reduce buffer exhaustions # # HOWEVER if there is real latency issues (such as too high a bitrate) # then smoothing can result in a stream appearing in slow motion # # you can disable and enable this feature here # use_smoothing: true [[cameras]] name = "B801" username = "admin" password = "Aa123456" address = "192.168.0.102:9000" # If you use a battery camera: **Instead** of an `address` supply the uid # as follows # uid = "ABCD01234567890EFG" # If you use an NVR that relays several camera connections you can choose which # camera to connect to with by setting the `channel_id` # # By default channel_id = 0. Eg the first connected camera on the device # **Note**: that unlike in the offical client the numbering starts from 0 not 1. # An 8 channel NVR would have channels 0 through 7 # channel_id = 0 ```